7 Easy Steps How to clean a bidet toilet seat

Sharing is caring!

If you have a bidet toilet seat in your bathroom, you must know how to maintain and clean it. The following steps can help with maintaining the hygiene of your bidet toilet seat.

1) Clean the Bidet Toilet Seat – Take off the lid and use a brush or cloth to wash away any dirt or debris from all sides of the bowl.

Do not forget to clean under where the water sprays out too! Rinse thoroughly before replacing on top of the bowl.

Bio Bidet Bliss BB2000 Elongated White Smart Toilet Seat, Premier...
  • 3 IN 1 STAINLESS STEEL NOZZLE - Offers posterior, feminine, and vortex washes, improves hygiene
  • SMART SEAT-SMART DECISION - Streamlined comfort-adjustable heated seat and water, slow closing...
  • ECO FRIENDLY- Energy Save Mode, reduces electricity and toilet paper, good for the environment
  • FEEL THE DIFFERENCE - Oscillating wide clean and pulsating message technology with bubble...
  • HYBRID HEATING TECHNOLOGY - Offers continuous warm water during your entire experience

2) Cleaning Spray for Your Bidet Toilet Seat– Mix up 1/4 cup bleach, 2 tablespoons vinegar, 2 cups hot water in a spray bottle then shake well before spraying down the entire surface of your bidet toilet seat.

7 Steps How to clean a bidet toilet seat

Follow the steps below if you have a bidet toilet seat in your bathroom…

If you have a bidet toilet seat in your bathroom, you must know how to maintain and clean it. The following steps can help with maintaining the hygiene of your bidet toilet seat.


Step One: Clean the Bidet Toilet Seat (take off the lid and use brush or cloth) don’t forget under where water sprays out too! Rinse thoroughly before replacing on top of the bowl.

Step Two: Mix up ¼ cup bleach, two tablespoons vinegar, two cups hot water in a spray bottle then shakes well before spraying down the entire surface of your bidet toilet seat.

Step Three: Use a sponge to wipe away any stains, mildew, or marks from the plastic parts in front and back.

Step Four: Mix up ¼ cup bleach with two tablespoons vinegar then spray all around where water sprays out (underneath). Rinse thoroughly before replacing on top of the bowl.


 

Step Five: Spray glass door and inside rim with disinfectant cleaner for bathroom surfaces such as Lysol wipes. Cover both sides if possible so that you get as much germ-killing power into this area!

Wipe dry using a paper towel or cloth side-by-side motion like cleaning other dirty areas in your home. Don’t forget to wipe the outside if you want your bidet toilet seat to look clean and new.

Step Six: Spray down inside rim of glass door with a disinfectant cleaner for bathroom surfaces such as Lysol wipes. Cover both sides if possible so that you get as much germ-killing power into this area!

Wipe dry using a paper towel or cloth side-by-side motion like cleaning other dirty areas in your home. Don’t forget to wipe the outside if you want your bidet toilet seat to look clean and new.

Step Seven: Apply a coat of vaseline on a rubber seal around the bottom edge then attach back onto the bowl, making sure it is snug against edges before replacing screws tightly from underneath!

You will be able to tell if it is snug and right if when you pull on the seat, it pulls up enough so that any water or urine inside will not leak out.

Step Eight: Wipe down outside of bidet with a disinfectant cleaner for bathroom surfaces such as Lysol wipes.

Step Nine: Replace toilet paper roll onto the holder in front of the bowl.

Step Ten: Place the lid back over top! You’re done!!!

Conclusion If you follow these steps to clean your bidet toilet seat properly every week then before long this process should go very quickly because all of the grime and dirt has been removed from its surface area.

The longer you wait between cleaning sessions, however, the harder it becomes to remove everything without scratches being left in the process.

How to clean toilet seat urine stains?

You can use a mixture of vinegar and water or hydrogen peroxide to get rid of toilet seat urine stains. This is not the best solution because it does require scrubbing, but it will work in a pinch!

Step One: Soak up as much liquid from your dirty bathroom surfaces with paper towels.

Step Two: Sprinkle baking soda over the wet patches on your toilet seat if you find any residue that has been soaked up by the towel.

Step Three: Pour either photo crystals or white distilled vinegar into a bowl and mix well until fully dissolved.

Step Four: Apply this mixture onto all wet spots on your surface area – be sure to saturate them so they are completely covered for at least one minute.


 

Step Five: Scrub the surface area in a circular motion for at least two minutes to loosen up any stains or residue from your toilet seat.

Step Six: Pour water onto the stained areas and scrub with a paper towel until all of the liquid is gone. You may need to do this multiple times depending on how bad your urine marks are.

Step Seven: Once you’re satisfied with how clean it is, wipe down the entire surface area using light pressure so that no trace remains behind. This will help prevent future occurrences!

We hope these tips were helpful – let us know if there’s anything else we can answer for you about cleaning bidet seats below!

How to remove yellow stains from the toilet seat?

Step One: Remove as much of the yellow stains (urine) on your toilet seat by wiping it down with a paper towel.

Step Two: Mix a solution of baking soda and hydrogen peroxide – one tablespoon in two cups of water is usually enough, but test this amount yourself to be sure.

Step Three: Pour the mixture onto the stained area and scrub vigorously for at least five minutes until all liquid has been removed!

You may need to do this more than once if there are still some stains left behind. This will also help you clean any other areas that were not affected yet.

Step Four: Rinse off thoroughly under running water until no traces remain before drying completely with another paper towel or cloth.


 

Step Five: Follow the package instructions on your toilet seat sanitizing solution and pour it onto your bidet’s toilet seat to disinfect! If you don’t have a specific type of cleaner, try using bleach – one tablespoon per two cups of water is usually enough.

Step Six: Let set for at least five minutes before rinsing off thoroughly under running water until no traces remain before drying completely with another paper towel or cloth.

Step Seven: To seal in all that freshness, spray your chosen finish (we recommend Armor All Protectant) onto the cleaned area and wipe clean with a dry cloth so the surface stays protected from damages.

You’re good as new! Please note that this process will vary depending on how often you use your bidet.

Article Source

Last update on 2021-10-29 at 00:33 / Affiliate links / Images from Amazon Product Advertising API

2 thoughts on “7 Easy Steps How to clean a bidet toilet seat”

Leave a Comment