How To Shim A Toilet In Less Than 1 Hour
A toilet can seem like a high-maintenance fixture. Between flushing, refilling, and rinsing, you may feel like you’re never going to get the job done. But a solid maintenance schedule can help you get the most out of your toilet fixture. Follow these simple tips to keep your toilet running smoothly.
Turn Off the Toilet
You probably don’t want to hear this, but if your toilet isn’t in use, turn it off. If you have children or forget to tell your guests, turning off the water can minimize damage and clean-up. In addition, every time water is running through your pipes, it’s pulling minerals from your walls and floors. Keeping the pipes clear will keep your toilet in good shape and save you a few extra bucks in the long run.
Clean the Bowl
Your toilet bowl collects germy bacteria from the air and from a few places on your floor. First, scrub the inside of the bowl with warm, soapy water. Then, rinse the bowl with clean water, leaving the bowl unstained. Allow the bowl to dry, and you’ve cleaned the bowl and prevented bacteria growth.
Flushing your toilet is important for two reasons. First, it gets rid of the water in your toilet. Without flushing, the water that collects in your toilet can sit in the bowl, potentially breeding bacteria and causing damage.
Second, most toilet parts wear down over time, so flushing clears out your pipes. If you have a tough time getting your toilet to flush, take a look at your water supply. If you have a low-pressure toilet, it may need more water to flush.
Keep a routine for toilet flushing. Most toilets should be flushed every 2 to 3 days. If your toilet is especially dirty, you may want to let it sit for a day. If you don’t flush regularly, your pipes will fill up with debris and cause clogs.
Change the Cartridge
Most toilets require a change in the water in their bowl every 6 months. This is important for two reasons. First, it keeps your water fresh and clear. Second, it keeps your toilet parts from wearing down.
Some toilet parts, like rubber seals and ball bearings, can go years without a break. But with every flush, they break down more and need to be replaced. To keep these parts working properly, you’ll need to have a new one.
If you’re having trouble getting your toilet to consistently flush, you may need to order a new toilet parts set. Changing the water in your bowl is an important step.
Change the Shower Filter
Your showerhead takes in a lot of water and minerals. To keep this water clean and clear, change your shower head filter every 30 days.
If your shower head is particularly stained, you may want to let it soak in bleach water for a while before changing it.
If your shower head is clogged, remove the stem and clean out the filter. Then, attach the stem again and test the shower’s flow.
If it’s still clogged, replace the showerhead.
Why You Shouldn’t Flush Ideally
There are many arguments for not flushing your toilet. For example, some say that flushing creates pressure that can help remove mineral build-up. But according to the National Sanitation Foundation (NSF), the only thing that flushing does is help the water flow down the pipes.
Keeping your toilet in good shape requires routine maintenance. Check your water pressure, change the water in your bowl, and change your shower head filter every few months.
It’s also important to store your toilet paper properly and keep your toilet clean. These simple steps will help you keep your toilet functioning properly and your plumbing safe.