6 Tips for Tiling Your Bathroom Floor In Less Than A Day
Tiling a bathroom floor may not seem like a huge deal, but trust us, it’s not easy! The bathroom is one of the most awkward and isolating rooms in the house, so why is it so difficult to tile? It’s probably because you’re used to the old way of laying a bathroom floor.
The old way usually involves several people, lots of time, and a whole lot of frustration. Luckily, there is an easier way to lay a bathroom floor. In this article, you can learn how to tile a bathroom floor easily.
How to Tile a Bathroom Floor?
Before getting started, all you need is a little time, a few tools, and a few tricks. Follow these simple tips and you’ll be on your way to a clean, tiled bathroom floor in no time.
Measure Twice, Tile Once
Before you do anything, make certain that your flooring is the right size for your space. We’ve all seen photos of beautiful bathrooms with floors that are far too small for the space. Not only is this frustrating to you and your family, but it also wastes valuable flooring.
The floor you choose should fit the walls and the tub and shower areas inside the bathroom. That’s why it’s so important to measure before you get started. If you’re tiling a large area like a bathroom floor, it’s also a good idea to measure the walls.
You want the tiles to be snug against the wall so they don’t move while you’re using the floor. If the tiles are too far off the wall, it will be a lot harder to use the floor. So, whether you’re measuring the floor or the walls, make certain you take accurate measurements.
Use a Steamroller
You’ve probably seen a few DIY tile tutorials that start with a steamroller. This is great, except that you’re probably doing it wrong. If you’re tiling the floor all by yourself, rolling the floor is the best way to get all the dirt and debris out from underneath it. But, if you have help, we would skip the steamroller and just use a broom and dustpan.
If you’re starting with a clean floor, skip the steamroller. It’s too dangerous for a beginner. Instead, use a broom and dustpan to quickly sweep up all the dirt and debris and then use a wet rag to wipe down the floor. After that, you can use a mop to quickly wet the floor and remove any remaining dirt.
Protect Your Floor Before You Tile
Protecting your floor before your tile is a no-brainer. It’s not just going to make your life easier (it will), but it’s also going to protect your investment. When you tile a floor, you’re creating a huge mess. There’s going to be a ton of dust, and your tools are going to get all gunked up with sawdust and dirt. Protect your floor by first covering it with plastic (or taping it down) and then covering it with a drop cloth.
- 10 oz thick 4' x 5' canvas drop cloth
- Popular contractor weight
- Great for craft projects, DIY and paint touch up jobs
- Washable and reusable
- Indoor and outdoor use
Make certain that the plastic is tucked neatly underneath the baseboards and that it’s not blocking any ventilation. You don’t want any dust or debris building up underneath your floor, taking up valuable space. If you can, also leave the plastic on the floor for a couple of days before you start tiling. This will allow the dust to settle.
Use a Tile Adhesion Promoter
When you’re installing ceramic or porcelain tiles, you’re going to cover them in the grout. If you’re not careful, the grout is going to get all over the floor and ruin your nice, clean floor. To prevent this, you should use a tile adhesive promoter.
Permehome is one of the best tile adhesion promoters on the market. It’s easy to apply, and you can use it even after your floor is completely sealed. It doesn’t get into your grout and ruin it, and it makes the floor more durable. If you’re tiling a smaller area, like a bathroom floor, you can use it on the floor before you start installing your tiles.
This will make the process of installing your tiles a lot easier. It’s also going to make your floor look a lot better. You can use it on any floor, but it’s especially great for floors like concrete or cement. It’s a great tile adhesive promoter.
Get Rid of The Grout Lines Before You Start Tiling
When you’re tiling a floor, you’re going to leave the lines that show where the old tiles were. If you’re tiling a large area, this isn’t a big deal. But, if you’re tiling a small bathroom or if you’re covering an existing linoleum floor, it’s going to be a pain. To get rid of the lines, you’re going to want to grout seal the floor.
Grout sealers make the lines disappear, so you’re not going to be able to see where you’ve already laid tiles. Grout sealers come in a variety of formulas and styles. The important thing to remember is that they all contain a pH-neutral mineral formula that seals the pores in the tile and makes them impervious to water. The most common types of sealers are epoxy, acrylic, and latex.
Don’t Be Afraid to Use a Tile Cutter
A lot of people are intimidated by tile cutters because they associate them with flooring contractors. However, you don’t have to use a professional-grade tile cutter. You can use a standard tile cutter that you can find at your local hardware store.
Tile cutters are going to be a lot less expensive than a floor cutter and they’re going to do the job just as well. There are a few important things to remember when using a tile cutter. Make certain that the tile cutter is sharp, makes a clean cut, and has good wheels. The wheels are important because they’re going to make it easy for you to move your tiles around.
The most important thing to remember is that tile cutters aren’t going to be as heavy or powerful as a floor cutter. This is a good thing. You don’t want to risk damaging your walls or ceiling with a heavy, powerful cutter. It’s critical that you protect them with a dust mask and goggles.
Bottom line
We’ve seen a ton of improvements in tile installation over the past few years, but there’s one thing that has remained the same: the bathroom floor is still a nightmare. Tiling a floor is a messy, time-consuming, and frankly annoying process, but it doesn’t have to be. Follow these tips and you’ll be on your way to a smooth and clean floor in no time!
Natasha is the owner of Smart Home Bath, a company that specializes in providing innovative and convenient home automation solutions. With a background in electrical engineering and a passion for making life easier through technology,
Natasha founded Smart Home Bath to help homeowners upgrade their living spaces and improve their daily routines.
Over the years, Natasha has become an expert in the field of smart home technology, and her company has grown to be a trusted source of high-quality products and expert installation services.
Whether you're looking to add voice-controlled lighting, automated temperature control, or any other smart home feature, Natasha and her team at Smart Home Bath have the knowledge and expertise to help you get the most out of your home automation system.
So, if you want to make your home smarter, Natasha and Smart Home Bath are the perfect people to turn to.
Last update on 2023-06-29 at 08:28 / Affiliate links / Images from Amazon Product Advertising API
One thought on “6 Tips for Tiling Your Bathroom Floor In Less Than A Day”