Stop Toilet Noise After You Flush – Tips to Keep Your Toilet Quiet
Did you know that flushing a toilet can generate as much noise as a blower door? Even though most of us aren’t aware of it, our toilet habits can cause a lot of noise.
Most of the time, we don’t even notice it. But when we do, we usually attribute the noise to something else. It can be annoying and it’s something you should keep an eye out for.
Here are a few things you can do to keep your toilet from making too much noise.
How to Stop Toilet Noise After You Flush
Make sure the water level is consistent
Consistently keeping the water level at the right height is key to keeping water in the tank and reducing noise.
If the water level is too high, the tank won’t be able to hold as much, and the flush will sound louder. If the water level is too low, the tank might overflow, which is also irritating and loud.
For the best results, check the water level every 1 to 2 days and adjust as needed.
- [Complete Mechanism Repairs Kit]: Complete replacement of internal fittings, great for integral...
- [Dual Flush Button]: Adjustable flush volumes on full and save water by reducing the amount of...
- [Design]: Drain valve height is about 20cm/7.9inch; Fit cistern height is 22-25cm/8.7-9.8inch;...
- [Note]: Only fit for integral sitting wc pan (one-piece closet). Please confirm the all size as...
- [High Quality]: Made from high quality plastic and stainless steel, green environmental...
Change the flushing mechanism
If your toilet is flushing with more force than it should, it could be creating a lot of noise. Determine exactly how it’s flushing and then ask yourself if that’s how you want it to be.
A slow, steady flow is quieter than a rapid one but still generates a decent amount of noise. If you already know the flushing mechanism of your toilet, you could try replacing it with one that makes less noise.
There are a few different flushing mechanisms, so you might have to do some research to find the right one for your toilet. One thing to keep in mind is that every toilet flushes differently, so you may have to experiment to find the right one for your toilet.
Make sure your toilet is properly balanced
Many toilets contribute to the toilet noise problem by being too light or heavy. But there’s a fine line between the right weight and too much weight.
If your toilet is too light or too heavy, you may be contributing to the noise it makes.
Here’s what you should do to find the right balance:
- Fill the tank halfway.
- Flush the toilet once.
- Flush the toilet again.
- Dump the water from the toilet.
- Note the water level.
- Refill the toilet tank halfway.
- Flush the toilet again.
- Note the water level once more.
If the water level is too low, it means that you have too much weight on the toilet, so you will have to add something to make it heavier.
Bottom solids first
If you have a little baby or child in the house, you may have already noticed that the toilet noise is particularly loud. This could be because the toilet is getting clogged frequently.
After your solid waste has come out, your toilet often tries to get back to its normal flush strength by flushing up more water and soap. This can be a very noisy process and you might find that it’s particularly loud.
Always cover your toilet bowl when you’re not using it
This tip is especially important for homes with children. If your toilet is noisy, the last thing you want to do is leave your toilet bowl uncovered. That’s how the child is going to see it when they’re not home.
But most importantly, it’s going to be a lot quieter when no one is using the toilet.
Check the hinges and bolts on your toilet
This probably goes without saying, but there is a chance that the hinges and bolts on your toilet are misaligned or broken.
A misaligned hinge or loose bolt can contribute to the overall noise level of your toilet, especially if it’s loose.
If this is the case, the noise is going to get louder when someone flushes or someone else is using the toilet because the toilet is moving around more than it should be. If this is the case, you should take it into consideration and fix it as soon as possible.
Install quiet seals for your tank
The toilet tank is the loudest part of the toilet and it makes the most noise. It can be easily silenced with quiet seals.
These seals are self-adhesive rubber inserts that go inside the tank and reduce noise by as much as 50%.To install quiet seals, you need to first measure the noise level of your toilet. You can do this by filling a large bowl with water and recording the sound.
Toilet spray jets
Most people don’t realize that they can be turned off. Despite this, they are still running the risk of creating a lot of noise with the jetting on. If you have a noisy toilet, it’s best to turn off the jetting.
To do this, you just have to keep an eye on the water level and turn off the water when it starts getting low. When you turn off the water, the toilet is likely to flush with less force, which will significantly lower the amount of noise it makes.
- Stainless finish coordinates with today's popular kitchen appliances and accessories
- Ideal for repairing problematic plumbing fixtures without the need to replace them
- Authentic Moen replacement part
- Designed for hassle-free installation
- Backed by Moen's One Year Limited Warranty
Bottom spray jets
These are similar to spray jets above the rim of your toilet. When you flush, the water comes down and lands at the bottom of the toilet. Some people find that this is too loud and they can turn it off with a toilet flapper.
If it’s too loud, you can try turning off the water that comes down while the toilet is flushed.
Toilets are usually pretty quiet, but if yours is loudly clogging, leaking, or otherwise making noise, you can make it quieter by following these tips.
You should keep your toilet water level consistent, flush gently, and try a different flushing mechanism if you’re having trouble. You should also check your bolts and hinges for alignment, make sure your toilet is balanced properly, and always cover your toilet when you’re not using it.
Bottom solids first, always, and last but not least, make sure the water is off when you’re not using your toilet. These things can make a big difference in keeping your toilet from making too much noise.
Natasha is the owner of Smart Home Bath, a company that specializes in providing innovative and convenient home automation solutions. With a background in electrical engineering and a passion for making life easier through technology,
Natasha founded Smart Home Bath to help homeowners upgrade their living spaces and improve their daily routines.
Over the years, Natasha has become an expert in the field of smart home technology, and her company has grown to be a trusted source of high-quality products and expert installation services.
Whether you're looking to add voice-controlled lighting, automated temperature control, or any other smart home feature, Natasha and her team at Smart Home Bath have the knowledge and expertise to help you get the most out of your home automation system.
So, if you want to make your home smarter, Natasha and Smart Home Bath are the perfect people to turn to.
Last update on 2023-03-24 at 08:53 / Affiliate links / Images from Amazon Product Advertising API
One thought on “Stop Toilet Noise After You Flush – Tips to Keep Your Toilet Quiet”